CUTTINGTOOLS / AI
Check grades
A · TOOLING ADVISOR
INDEPENDENT CUTTING-TOOL INTELLIGENCE BRAND‑NEUTRAL ISO P·M·K·N·S·H TURNING / MILLING / DRILLING EN · DE · TR · ES

The comparison your dealer won't give you.

Free evidence check · no account · payment only after coverage

See which manufacturer-chart evidence we have for your carbide grades before you buy a report. The coverage check is free.

EUR 9 for one grade (about US$10), EUR 22 for up to three (about US$24) · charged in EUR by Gumroad, USD conversion and tax may vary · PDF + XLSX · one-time payment. Paste the full list on the next page. View the actual sample report.

Two decades of cutting-tool expertise, in an advisor that answers in seconds. Brand-neutral: 554 grades cross-referenced across 15 brands, 53,000+ tools indexed from manufacturer catalogue data. We sell no tools and take no commission.

Recommendations come from ISO criteria (grade, coating, cutting data), not supplier relationships. No brand pays for placement, and no vendor steers the answer.

ISO Material Group Select →
P
SteelUnalloyed & low-alloy
starting point
Recommended family
CNMG · −PM turning
Grade / coating
GC4325 · CVD Ti(C,N)
Geometry
80° rhombus · −MF
Cutting speed Vc
220–320 m/min
P-group: tough substrate with a CVD multilayer resists plastic deformation at high cutting speeds. Optimise for crater wear on continuous cuts.
Full ISO P reference
7
Tool categories
6
ISO material groups
0%
Vendor influence100% catalogue-sourced data
€0
To start, 3/day free · 10 with an account
02 · GRADE REPORT

Before you change supplier, see what the charts actually back

A dealer offers you another maker's grade, or you want a second source for the one you run. The report tells you which alternatives two or more manufacturer charts put at the same ISO position as your grade, which rest on one chart only, what could not be verified, and how to prove a switch on one part before you buy a box. Up to three grades in one document, with published cutting speeds where the maker gives a comparable row and a cost-per-part sheet you fill with your own prices.

EUR 9 · one grade · EUR 22 for up to 3
About US$10 and US$24. Charged in EUR by Gumroad; final USD conversion and tax may vary.
One-time payment · no subscription · 14-day refund
  • PDF + XLSX, generated from manufacturer-published data. See a full sample report (PDF).
  • Paid through Gumroad: your card details go to Gumroad, never to us. Invoice with your VAT ID from the receipt.
  • Not useful? Reply to the delivery email within 14 days and we refund the full price.
  • We sell no tools and take no commission. Same chart position is not same performance: every change is a trial on one part first.
  • Expert-reviewed reports are reviewed and signed by Murat Önder, 20+ years in cutting tools. The EUR 9 and EUR 22 grade reports are generated automatically from the published charts.
Check my grades →

The coverage check is free. You only pay if you want the full document. How buying works

03 · TOOLING CATEGORIES

Cutting tools are a world, not one insert.

The index covers the full machining stack: turning, milling, drilling and hole-making, threading, grooving and parting, reaming and boring, across every ISO material group.

04 · THE ADVISOR

Describe the job. Get a decision.

Plain language in, structured recommendation out: grade, geometry, cutting data and cross-brand alternatives, with the reasoning you can defend on the floor.

Example jobs
JOB 01TURNING
316L stainless, external finishing, Vc 220, wet
JOB 02MILLING
Shoulder milling D2 at 52 HRC, interrupted
JOB 03DRILLING
Ø12 hole, Inconel 718, through-coolant
ADVISOR v2.6 brand-neutral · 53,000+ indexed tools
316L stainless, external finishing, Vc 220 m/min, wet, which insert? Ask →
↓ example output · click to try this query live
316L stainless, external finishing, Vc 220 m/min, wet
RECOMMENDATION · ISO M · TURNING
316L work-hardens fast: keep a positive rake and a sharp edge line for a clean shear plane, and pick a stainless-rated grade that survives the heat at Vc 220. GC2220 is a CVD M-grade sitting mid-range in toughness, which is the right trade for a wet finishing pass on an austenitic.
WNMG 080404-MM
GC2220
Geometry
−MM medium
Coating
MT-CVD TiCN/Al₂O₃
Vc
180–230 m/min
fn
0.10–0.20
Cross-ref Kennametal KCM25BWalter WSM20SISCAR IC6025
Your job is different? Ask it now → · 3 free answers a day, no account needed
Also free: the advisor in ChatGPT · 8-brand grade cross-reference PDF · ISO material-group cheat-sheet
05 · FAQ

Frequently asked questions

Does the advisor recommend specific brands?

No. CuttingToolsAI is independent and brand-neutral. Recommendations are based on cutting data and ISO 513 material groups (P, M, K, N, S, H), not catalogue position, and span all major brands.

How many cutting tools are indexed?

53,000+ cutting tools are indexed from manufacturer catalogue data (ISO 13399), and 554 grades are cross-referenced across 15 brands.

Is there a free tier?

Yes. You get 3 free questions a day with no account needed and 10 a day with a free account. The grade finder and the coverage check are free.

Do you sell cutting tools?

No. CuttingToolsAI sells no tools, holds no distributor agreement with any manufacturer and takes no commission or placement fee. We sell information: free comparisons and a paid grade report.

How do I pay, and can I get a refund?

Payment runs through Gumroad; your card details go to Gumroad and its payment processors, never to us. Reports are a one-time payment with no subscription. If a report is not useful to you, reply to the delivery email within 14 days and we refund the full price.

Can I see a sample report before buying?

Yes. A complete sample for three turning grades, made by the same pipeline as paid reports, is at this PDF.

06 · REFERENCE LIBRARIES

Find the exact grade or material by code.

Browse manufacturer-chart grade candidates, material designation references, and manufacturer-listed grade successors. These references are separate from the AI advisor and free to read.