CUTTINGTOOLS / AI
Find equivalents
Advisor / ISO GPS reference / ISO 21920 vs ISO 1302
Standards · ISO 21920

ISO 21920 replaces ISO 1302 / 4287 / 4288

The three-part ISO 21920 (published December 2021) replaces the earlier surface texture indication, profile parameter and decision rule standards. Drawings issued before it stay bound to the older standards.

In the shop

Symptom: roughness numbers on two drawings do not compare. Likely cause: they cite different standards, and the standard a drawing cites and its indication decide, so a newer drawing may still cite ISO 1302 and ISO 4287 while an older one stays bound to them. A drawing with the older ISO 1302 indication takes its parameters from ISO 4287, and one with the newer ISO 21920 indication (a different roughness symbol) takes them from ISO 21920. First check: read the standard and the indication on each drawing. If they differ, confirm which one governs before comparing numbers or changing feed.

General shop guidance in our own words. The drawing and the standard it cites decide; verify on a sample part.

Related standards

ISO 1 reference temperature

Ask about your drawing

Tell the advisor the feature, the tolerance on the drawing and the material. It answers with machining choices, brand-neutral.

Sources

Definition written in our own words and checked against digitalsurf.com. Symbol and term names follow ISO 21920; we do not reproduce standard text. See the full index.

Shop note reviewed by our tooling specialist (carbide cutting-tool production and tool measurement background) on 12 October 2026.