CUTTINGTOOLS / AI
Find equivalents
Advisor / ISO GPS reference / Profile of a surface
Profile tolerance · ISO 1101

Profile of a surface

Limits how far a whole surface may deviate from its design shape.

In the shop

Symptom: a contoured surface is off its design shape or shows scallop lines. Likely cause: cusps left by the ball or nose radius, which shrink with a smaller step-over, a coarse CAM chord tolerance, or tool wear. First check: read the CAM chord tolerance and the wear on the finishing tool. If cusps dominate, reduce the step-over; if the cutter cannot reach a concave corner, use a radius smaller than the tightest concave radius.

General shop guidance in our own words. The drawing and the standard it cites decide; verify on a sample part.

Related profile tolerances

Profile of a line

Ask about your drawing

Tell the advisor the feature, the tolerance on the drawing and the material. It answers with machining choices, brand-neutral.

Sources

Definition written in our own words and checked against keyence.com. Symbol and term names follow ISO 1101; we do not reproduce standard text. See the full index.

Shop note reviewed by our tooling specialist (carbide cutting-tool production and tool measurement background) on 12 October 2026.