Cross-brand grade equivalence · brand-neutral
Sumitomo DA2200: candidate alternatives
How to read this page. These alternatives are compiled from grade comparison charts the manufacturers publish themselves. A direct peer is a grade listed in the same row of a manufacturer comparison chart as DA2200: that is chart comparability, not verified cutting performance and not a drop-in swap. Grades that share only the ISO 513 application position are listed apart, marked not verified. Substrate, cobalt content, coating and edge preparation still differ, and so will tool life and the cutting data you should start from. Validate any swap on a sample part before you change production. Something wrong on this page, or a grade you want removed? research@cuttingtoolsai.eu.
Sumitomo DA2200 sits at ISO 513 application classes N20, N30 — non-ferrous (aluminium, copper). No manufacturer chart on file lists a direct peer for it. 16 grades from other makers share an ISO position with it. None has been verified.
Alternatives by evidence
Direct peers
Listed in the same row of a manufacturer comparison chart. This is chart comparability, not verified cutting performance.
No manufacturer chart on file lists a direct peer for this grade. Grades at the same ISO position are listed as not verified.
Same ISO position, not verified
These grades overlap in ISO position only. No manufacturer chart lists them together, and operation and tool material are not verified.
- Mitsubishi MD230 ISO N20 N30 · not verified
- Seco PCD30 ISO N30 · not verified
- Seco PCD20 ISO N20 · not verified
- Seco PCD30M ISO N30 · not verified
- Seco PCD05 ISO N20 N30 · not verified
9 more not shown.
More wear-resistant alternatives
Positioned below this grade on the ISO scale (more wear resistance, less toughness). ISO position only, not verified.
- Mitsubishi MD220 ISO N20 · not verified
- Kennametal KD1425 ISO N20 · not verified
The free check and the report show each grade with its sources: check DA2200 free.
What this does and does not tell you
An ISO 513 application class says which material group and which range of operations a grade is built for. Two grades sharing a class are built for the same job. They are not identical: substrate grain, cobalt content, coating and edge preparation still differ, and so will tool life and the cutting data you should start from. Treat a candidate here as the shortlist for your own trial, not as a drop-in replacement.
Everything above is derived from the makers' own published application data. Nothing is inferred from price, availability or popularity, and no manufacturer pays to appear here.
Related candidate alternatives
- Kennametal KD1425 N10, N20
- Seco PCD05 N10, N20, N30
- Mitsubishi MD230 N20, N30
- Sumitomo AC4010K K05, K10
- Sumitomo AC530U K20, M30, M35, P20
- Sumitomo AC6020M M10, M20
All cross-brand grade candidates
Check Sumitomo DA2200 against the published chart evidence first. If this grade has a documented candidate, you can order an automatically generated report for one grade (about US$10, charged EUR 9), or add up to two grades (about US$24, charged EUR 22). Currency conversion and tax at checkout may change the USD amount. A chart comparison is not a guaranteed substitute.
Check this grade and see the report →Are you overpaying on your Sumitomo DA2200 inserts? Paste your insert list and get a cost audit in about 30 seconds: cross-brand candidate alternatives at the same ISO application position, and where you are likely overpaying. No signup, no sales call.
After the free check: a sourced PDF + XLSX report from EUR 9 for one grade. How buying works
Ask about your own case
Material, operation, machine — get a grade and a starting cutting data set, grounded in the same reference data.