Cross-brand grade equivalence · brand-neutral
Tungaloy AH710: candidate alternatives
How to read this page. These alternatives are compiled from grade comparison charts the manufacturers publish themselves. A direct peer is a grade listed in the same row of a manufacturer comparison chart as AH710: that is chart comparability, not verified cutting performance and not a drop-in swap. Grades that share only the ISO 513 application position are listed apart, marked not verified. Substrate, cobalt content, coating and edge preparation still differ, and so will tool life and the cutting data you should start from. Validate any swap on a sample part before you change production. Something wrong on this page, or a grade you want removed? research@cuttingtoolsai.eu.
Tungaloy AH710 sits at ISO 513 application classes K10, P05 — cast iron, steel. 1 Direct peer is from other makers, listed in the same row of a manufacturer comparison chart. This is chart comparability, not verified cutting performance. 92 more grades share an ISO position only and are not verified.
Alternatives by evidence
Direct peers
Listed in the same row of a manufacturer comparison chart. This is chart comparability, not verified cutting performance.
- Walter WPP10S ISO P10 P15 · 1 chart (Korloy)
Same ISO position, not verified
These grades overlap in ISO position only. No manufacturer chart lists them together, and operation and tool material are not verified.
- Sumitomo ACU2500 ISO K10 P05 · not verified
- ISCAR IC5010 ISO K10 · not verified
- Mitsubishi NX2525 ISO K10 · not verified · cermet
- Kennametal KC515M ISO K10 · not verified
- Kennametal KC9325 ISO K10 · not verified
87 more not shown.
The free check and the report show each grade with its sources: check AH710 free.
What this does and does not tell you
An ISO 513 application class says which material group and which range of operations a grade is built for. Two grades sharing a class are built for the same job. They are not identical: substrate grain, cobalt content, coating and edge preparation still differ, and so will tool life and the cutting data you should start from. Treat a candidate here as the shortlist for your own trial, not as a drop-in replacement.
Everything above is derived from the makers' own published application data. Nothing is inferred from price, availability or popularity, and no manufacturer pays to appear here.
Related candidate alternatives
- Tungaloy AT9530 K15, P20
- Tungaloy AH6235 M30, M40, P35
- Tungaloy BX90S K20, K30
- Tungaloy AH6225 M20, M35, P20
- Tungaloy BXC90 K20, K30
- Tungaloy AH140 M40, P40
All cross-brand grade candidates
Check Tungaloy AH710 against the published chart evidence first. If this grade has a documented candidate, you can order an automatically generated report for one grade (about US$10, charged EUR 9), or add up to two grades (about US$24, charged EUR 22). Currency conversion and tax at checkout may change the USD amount. A chart comparison is not a guaranteed substitute.
Check this grade and see the report →Are you overpaying on your Tungaloy AH710 inserts? Paste your insert list and get a cost audit in about 30 seconds: cross-brand candidate alternatives at the same ISO application position, and where you are likely overpaying. No signup, no sales call.
After the free check: a sourced PDF + XLSX report from EUR 9 for one grade. How buying works
Ask about your own case
Material, operation, machine — get a grade and a starting cutting data set, grounded in the same reference data.