Cross-brand grade equivalence · brand-neutral
Walter WSP45: candidate alternatives
How to read this page. These alternatives are compiled from grade comparison charts the manufacturers publish themselves. A direct peer is a grade listed in the same row of a manufacturer comparison chart as WSP45: that is chart comparability, not verified cutting performance and not a drop-in swap. Grades that share only the ISO 513 application position are listed apart, marked not verified. Substrate, cobalt content, coating and edge preparation still differ, and so will tool life and the cutting data you should start from. Validate any swap on a sample part before you change production. Something wrong on this page, or a grade you want removed? research@cuttingtoolsai.eu.
Walter WSP45 sits at ISO 513 application classes M40, P40 — stainless steel, steel. 1 Direct peer is from other makers, listed in the same row of a manufacturer comparison chart. This is chart comparability, not verified cutting performance. 36 more grades share an ISO position only and are not verified.
Alternatives by evidence
Direct peers
Listed in the same row of a manufacturer comparison chart. This is chart comparability, not verified cutting performance.
- Kennametal KC725M ISO M40 P40 · 2 charts (Sumitomo, Tungaloy)
Same ISO position, not verified
These grades overlap in ISO position only. No manufacturer chart lists them together, and operation and tool material are not verified.
- Mitsubishi VP30RT ISO M40 P40 · not verified
- TaeguTec TT8020 ISO M40 P40 · not verified
- ISCAR IC830 ISO P40 · not verified
- Kennametal KC735M ISO P40 · not verified
- Kyocera PR1535 ISO M40 · not verified · carbide
31 more not shown.
The free check and the report show each grade with its sources: check WSP45 free.
What this does and does not tell you
An ISO 513 application class says which material group and which range of operations a grade is built for. Two grades sharing a class are built for the same job. They are not identical: substrate grain, cobalt content, coating and edge preparation still differ, and so will tool life and the cutting data you should start from. Treat a candidate here as the shortlist for your own trial, not as a drop-in replacement.
Everything above is derived from the makers' own published application data. Nothing is inferred from price, availability or popularity, and no manufacturer pays to appear here.
Related candidate alternatives
- Dijet JC5015 M20, M30, M35, P25, S20, S25
- Walter WSM20S M15, M20, S20, S25
- ISCAR IC30N P10, P20, P30
- Walter WSM01 M10, S05, S10
- ISCAR IC328 M40, P30
- Walter WKP35S K20, P20
All cross-brand grade candidates
Check Walter WSP45 against the published chart evidence first. If this grade has a documented candidate, you can order an automatically generated report for one grade (about US$10, charged EUR 9), or add up to two grades (about US$24, charged EUR 22). Currency conversion and tax at checkout may change the USD amount. A chart comparison is not a guaranteed substitute.
Check this grade and see the report →Are you overpaying on your Walter WSP45 inserts? Paste your insert list and get a cost audit in about 30 seconds: cross-brand candidate alternatives at the same ISO application position, and where you are likely overpaying. No signup, no sales call.
After the free check: a sourced PDF + XLSX report from EUR 9 for one grade. How buying works
Ask about your own case
Material, operation, machine — get a grade and a starting cutting data set, grounded in the same reference data.