Circular run-out
Limits the variation at any single circumference position when the part turns about the datum axis.
Symptom: the indicator moves as the part turns. Likely cause: the part sits off the datum axis in the machine, or the chuck or collet has runout. First check: measure chuck and collet runout before the finishing cut, and confirm the datum axis the drawing uses, because runout is evaluated about that axis and not necessarily the one you turned about. If the error remains, turn the diameters in one chucking or between centers.
General shop guidance in our own words. The drawing and the standard it cites decide; verify on a sample part.
Related run-out tolerances
Tell the advisor the feature, the tolerance on the drawing and the material. It answers with machining choices, brand-neutral.
Definition written in our own words and checked against keyence.com. Symbol and term names follow ISO 1101; we do not reproduce standard text. See the full index.
Shop note reviewed by our tooling specialist (carbide cutting-tool production and tool measurement background) on 12 October 2026.