CUTTINGTOOLS / AI
Find equivalents
Advisor / ISO GPS reference / Total run-out
Run-out tolerance · ISO 1101

Total run-out

Limits the variation over the whole surface when the part turns about the datum axis.

In the shop

Symptom: the whole surface wobbles about the datum axis, with taper or bow along the length. Likely cause: the causes of circular runout plus form errors along the length, because total runout is the variation of the entire surface about one datum axis, not a sum of circular readings. First check: trace several sections and the length against the datum axis the drawing names. If taper or bow shows, use steady support on long parts and finish with a sharp edge at a depth that cuts instead of rubbing.

General shop guidance in our own words. The drawing and the standard it cites decide; verify on a sample part.

Related run-out tolerances

Circular run-out

Ask about your drawing

Tell the advisor the feature, the tolerance on the drawing and the material. It answers with machining choices, brand-neutral.

Sources

Definition written in our own words and checked against keyence.com. Symbol and term names follow ISO 1101; we do not reproduce standard text. See the full index.

Shop note reviewed by our tooling specialist (carbide cutting-tool production and tool measurement background) on 12 October 2026.