Position (true position)
Limits how far a feature may sit from its theoretically exact location relative to the datums.
Symptom: holes land off their true positions. Likely cause: drill wander, datum or workholding errors, backlash or thermal drift. First check: measure the holes against the datums and see whether the shift is consistent (setup or datum) or scattered (wander or backlash). If it scatters, use a spot drill or a short stiff pilot; if a drilled hole needs correcting, boring it in the same setup usually corrects position, while reaming follows the drilled hole and does not.
General shop guidance in our own words. The drawing and the standard it cites decide; verify on a sample part.
Related location tolerances
Coaxiality · Concentricity · Symmetry
Tell the advisor the feature, the tolerance on the drawing and the material. It answers with machining choices, brand-neutral.
Definition written in our own words and checked against keyence.com. Symbol and term names follow ISO 1101; we do not reproduce standard text. See the full index.
Shop note reviewed by our tooling specialist (carbide cutting-tool production and tool measurement background) on 12 October 2026.