Symmetry
Limits how far a feature may be off-center relative to a datum center plane.
Symptom: a feature is off-center between two faces. Likely cause: the two sides were machined from different datums, or each face was checked on its own. First check: read which standard the drawing cites, since ASME Y14.5-2018 removed the symmetry symbol and ASME drawings use position or profile instead. If it is ISO, machine both sides from the same datum in one setup and check the centre plane between the two features with a CMM or a fixture that references both sides to the datum.
General shop guidance in our own words. The drawing and the standard it cites decide; verify on a sample part.
Related location tolerances
Coaxiality · Concentricity · Position
Tell the advisor the feature, the tolerance on the drawing and the material. It answers with machining choices, brand-neutral.
Definition written in our own words and checked against mitutoyo.com. Symbol and term names follow ISO 1101; we do not reproduce standard text. See the full index.
Shop note reviewed by our tooling specialist (carbide cutting-tool production and tool measurement background) on 12 October 2026.