CUTTINGTOOLS / AI
Find equivalents

Carbide grade · Mitsubishi · ISO K20

Mitsubishi MH515

MH515 is a Mitsubishi carbide turning insert grade placed at the ISO K20 application position (cast iron) in manufacturer-published grade comparison charts. 1 Direct peer is from other makers, listed in the same row of a manufacturer comparison chart. This is chart comparability, not verified cutting performance. 60 more grades share an ISO position only and are not verified. Sharing an ISO position is a chart placement, not a claim the grades are interchangeable — verify on a sample part before switching.

Same ISO position in the manufacturer charts, with the source on the full page. Running several grades? Separate them with commas to check the whole list. No signup.

Every maker's AI recommends its own tools. Ours compares all makers and shows the published source behind each answer, or tells you it could not verify.

Grade summary — Mitsubishi MH515

BrandMitsubishi
ISO application positionK20 — cast iron
Coating / substrateNot verified in the reference charts
Placement evidenceCandidate: named by 2+ manufacturer-published charts
Chart sourcesIngersoll turning grade cross-reference (live-fetched 2026-07-14), TaeguTec grade comparison table, Tungaloy grade comparison chart, Mitsubishi Materials grades comparison table, Reliable Industrial Supply chart

Alternatives by evidence

Direct peers

Listed in the same row of a manufacturer comparison chart. This is chart comparability, not verified cutting performance.

  • Sandvik GC3225 ISO K20 · 3 charts (Ingersoll, TaeguTec, Tungaloy)

Same ISO position, not verified

These grades overlap in ISO position only. No manufacturer chart lists them together, and operation and tool material are not verified.

  • ISCAR IC908 ISO K20 · not verified
  • Kennametal KC524M ISO K20 · not verified
  • Kennametal KCK20B ISO K20 · not verified
  • Kyocera CA320 ISO K20 · not verified
  • Kyocera CA420M ISO K20 · not verified

55 more not shown.

Source-backed grade report · PDF + XLSX

Check Mitsubishi MH515 against the published chart evidence first. If this grade has a documented candidate, you can order an automatically generated report for one grade (about US$10, charged EUR 9), or add up to two grades (about US$24, charged EUR 22). Currency conversion and tax at checkout may change the USD amount. A chart comparison is not a guaranteed substitute.

Check this grade and see the report →

Ask the AI advisor about MH515

Cutting data for your material, when MH515 is the right call versus its chart-listed alternatives, and what to check before switching — answered with verified reference data plus live search.

Frequently asked questions

What is Mitsubishi MH515?

MH515 is a Mitsubishi carbide turning insert grade. Manufacturer-published grade comparison charts place it at the ISO K20 application position (cast iron). Coating and substrate details are not verified in the reference charts.

Which grades are direct peers of MH515?

1 grade from another maker is listed in the same row of a manufacturer comparison chart as MH515: Sandvik GC3225. This is chart comparability, not verified cutting performance. Grades that share only the ISO position are listed separately as not verified. Same position is not the same performance: verify on a sample part before switching.

Is a comparable grade a drop-in replacement for MH515?

No. The charts confirm the application position only. Chipbreaker geometry, coating and edge preparation differ between brands, so always test the alternative on a sample part and compare tool life before committing production.

Does this cross-reference favour specific brands?

No. Comparable grades appear here only because manufacturer-published comparison charts place them at the same ISO application position. No manufacturer pays for placement, nothing on this page is sponsored, and CuttingToolsAI sells no tools and earns no commission. Placements backed by a single chart are flagged as such, and every comparison ends the same way: verify on a sample part before switching.

Grade charts by brand

Cost check · free · brand-neutral

Are you overpaying on your MH515 inserts? Paste your insert list and get a cost audit in about 30 seconds: cross-brand candidate alternatives at the same ISO application position, and where you are likely overpaying. No signup, no sales call.

Run a free cost audit → Check your whole grade list · free

After the free check: a sourced PDF + XLSX report from about USD 10 (EUR 9) per grade. How buying works

Related grades

All grades →

Where MH515 is used: designations and materials