Insert cross-reference · 90° Square · 0° clearance · 12mm IC · 1.2mm Rε (roughing)
SNMG120412 Cross Reference / ANSI SNMG 433
Equivalent SNMG120412 inserts across 7 brands — Sandvik, ISCAR, Kennametal, Walter, Tungaloy, Seco, Mitsubishi. In US (inch, ANSI B212.4) catalogs this same insert is listed as SNMG 433 — identical geometry, different designation system. Same ISO 1832 geometry class; grades, coatings and application windows differ by manufacturer. Treat equivalents as starting points and verify on a sample part: a cross-reference matches the geometry, not the process.
This is the roughing size of the family: the larger nose radius gives a stronger corner for heavier depths of cut and interrupted work, but raises radial force and the tendency to chatter on slender parts.
| Brand | Designation / grade | Coating | Application |
|---|---|---|---|
| Sandvik | SNMG120412 GC4325 | Inveio® CVD Al₂O₃ | P20–P30 |
| ISCAR | SNMG120412 IC8250 | SUMO TEC® CVD Al₂O₃ | P20–P30 |
| Kennametal | SNMG120412 KCP25B | KENGold™ CVD | P20–P30 |
| Walter | SNMG120412 WPP20S | Tiger·tec® Silver CVD | P20–P30 |
| Tungaloy | SNMG120412 T9125 | CVD TiCN/Al₂O₃ | P20–P30 |
| Seco | SNMG120412 TP2500 | Duratomic® CVD | P20–P30 |
| Mitsubishi | SNMG120412 MC6025 | CVD Al₂O₃ | P20–P30 |
Grades used Sandvik GC4325 · ISCAR IC8250 · Kennametal KCP25B · Walter WPP20S · Tungaloy T9125 · Seco TP2500 · Mitsubishi MC6025
22 brands list SNMG120412 in their published standard programs, with 1,797 catalog variants across chipbreakers, grades and coatings. Variant count shows how deep each maker's standard range goes for this geometry. It is not a quality ranking.
| Brand | Catalog variants |
|---|---|
| Sumitomo | 339 |
| Kennametal | 206 |
| Mitsubishi Materials | 206 |
| Kyocera | 150 |
| Widia | 136 |
| Sandvik-Coromant | 135 |
| Tungaloy | 122 |
| Walter | 88 |
| Ingersoll | 82 |
| Korloy | 59 |
| SECO Tools | 58 |
| ZCC Cutting Tools | 50 |
| Hoffmann Group | 40 |
| Ceratizit | 35 |
| Iscar | 31 |
| Boehlerit | 27 |
| WNT | 18 |
| Ceramtec | 5 |
| Hahn+Kolb | 5 |
| Misumi | 3 |
| MOLDINO Tool Engineering | 1 |
| NTK Cutting Tools | 1 |
Hoffmann Group and Hahn+Kolb are distributor private-label programs (GARANT, ATORN). Counts are catalog listings, not stock levels. Availability varies by region and distributor.
- S — shape
- square (90°)
- N — clearance angle
- relief angle 0° (negative insert, double-sided use possible)
- M — tolerance
- class M — molded, medium tolerance on inscribed circle and corner point (typically ±0.05–0.13 mm depending on size)
- G — type
- cylindrical fixing hole, chipbreaker on both faces (double-sided insert)
- 12 — cutting edge length / IC
- 12 mm nominal (inscribed circle / edge length class)
- 04 — thickness
- insert thickness 4.76 mm
- 12 — corner radius
- Rε = 1.2 mm nose radius
Type any maker's grade (e.g. GC4325, AC820P, T9215) to see grades other brands publish at the same ISO application position. VERIFIED = multi-source consensus; 2+ CHARTS = placement independently confirmed by two or more manufacturer charts; SINGLE-SOURCE = one chart only. Comparable at ISO position — not identical performance. Verify on a sample part.
Are you overpaying on your SNMG120412 inserts? Paste your insert list and get a cost audit in about 30 seconds: cross-brand equivalents at the same ISO application position, and where you are likely overpaying. No signup, no sales call.
Related designations