CUTTINGTOOLS / AI
Find equivalents

Carbide grade · Tungaloy · ISO P/M

Tungaloy T9125

T9125 is a Tungaloy carbide insert grade (CVD TiCN/Al₂O₃), applied in the ISO P/M areas. In this cross-reference it appears on 10 insert designations; the same insert geometry is also made by ISCAR, Kennametal, Mitsubishi, Sandvik, Seco, Walter. No manufacturer chart on file lists a direct peer for it. Same position is not the same performance: verify on a sample part before switching.

Same ISO position in the manufacturer charts, with the source on the full page. Running several grades? Separate them with commas to check the whole list. No signup.

Every maker's AI recommends its own tools. Ours compares all makers and shows the published source behind each answer, or tells you it could not verify.

Grade summary

Brand
Tungaloy
Coating / substrate
CVD TiCN/Al₂O₃
ISO application area
P — steel · M — stainless steel
Application range (catalog)
P20–P30
Used in
10 insert designations in this reference

Cross-brand alternatives (manufacturer charts)

Direct peers

Listed in the same row of a manufacturer comparison chart. This is chart comparability, not verified cutting performance.

No manufacturer chart on file lists a direct peer for this grade. Grades at the same ISO position are listed as not verified.

Check T9125 with your other grades →

Insert designations using T9125

DesignationGeometryCatalog codeApplication
CNMG120404 80° Diamond · 0° clearance · 12mm IC · 0.4mm Rε (finishing) CNMG120404 T9125 P20–P30
CNMG120408 80° Diamond · 0° clearance · 12mm IC · 0.8mm Rε CNMG120408 T9125 P20–P30
DNMG150604 55° Diamond · 0° clearance · 15mm IC · 0.4mm Rε (finishing) DNMG150604 T9125 P20–P30
DNMG150608 55° Diamond · 0° clearance · 15mm IC · 0.8mm Rε DNMG150608 T9125 P20–P30
DNMG150612 55° Diamond · 0° clearance · 15mm IC · 1.2mm Rε (roughing) DNMG150612 T9125 P20–P30
SNMG120404 90° Square · 0° clearance · 12mm IC · 0.4mm Rε (finishing) SNMG120404 T9125 P20–P30
SNMG120408 90° Square · 0° clearance · 12mm IC · 0.8mm Rε SNMG120408 T9125 P20–P30
SNMG120412 90° Square · 0° clearance · 12mm IC · 1.2mm Rε (roughing) SNMG120412 T9125 P20–P30
TNMG160408 60° Triangle · 0° clearance · 16mm IC · 0.8mm Rε TNMG160408 T9125 P20–P30
TNMG160412 60° Triangle · 0° clearance · 16mm IC · 1.2mm Rε (roughing) TNMG160412 T9125 P20–P30

Frequently asked questions

What is Tungaloy T9125?

T9125 is a Tungaloy carbide insert grade (CVD TiCN/Al₂O₃), applied in the ISO P/M areas, used in 10 insert designations in this reference.

Does this cross-reference favour specific brands?

No. Comparable grades appear here only because manufacturer-published comparison charts place them at the same ISO application position. No manufacturer pays for placement, nothing on this page is sponsored, and CuttingToolsAI sells no tools and earns no commission. Placements backed by a single chart are flagged as such, and every comparison ends the same way: verify on a sample part before switching.

Grade charts by brand

Ask the AI advisor about T9125
Cutting data for your material, when T9125 is the right call versus its equivalents, and what to check before switching — answered with verified reference data plus live search. Edit the question and hit Ask — 3 free answers a day, no account.
Cost check · free · brand-neutral

Are you overpaying on your T9125 inserts? Paste your insert list and get a cost audit in about 30 seconds: cross-brand candidate alternatives at the same ISO application position, and where you are likely overpaying. No signup, no sales call.

Run a free cost audit → Check your whole grade list · free

After the free check: a sourced PDF + XLSX report from EUR 9 for one grade. How buying works

Related grades

Where T9125 is used: designations and materials