Cross-brand grade equivalence · brand-neutral
Kennametal KC735M: candidate alternatives
How to read this page. These alternatives are compiled from grade comparison charts the manufacturers publish themselves. A direct peer is a grade listed in the same row of a manufacturer comparison chart as KC735M: that is chart comparability, not verified cutting performance and not a drop-in swap. Grades that share only the ISO 513 application position are listed apart, marked not verified. Substrate, cobalt content, coating and edge preparation still differ, and so will tool life and the cutting data you should start from. Validate any swap on a sample part before you change production. Something wrong on this page, or a grade you want removed? research@cuttingtoolsai.eu.
Kennametal KC735M sits at ISO 513 application classes M30, P30, P40 — stainless steel, steel. 1 Direct peer is from other makers, listed in the same row of a manufacturer comparison chart. This is chart comparability, not verified cutting performance. 121 more grades share an ISO position only and are not verified.
Alternatives by evidence
Direct peers
Listed in the same row of a manufacturer comparison chart. This is chart comparability, not verified cutting performance.
- Mitsubishi VP30RT ISO P30 P40 · 2 charts (Korloy, Sumitomo)
Same ISO position, not verified
These grades overlap in ISO position only. No manufacturer chart lists them together, and operation and tool material are not verified.
- ISCAR IC830 ISO M30 P30 P40 · not verified
- TaeguTec TT8020 ISO M30 P30 P40 · not verified
- Kyocera PR1535 ISO M30 P30 · not verified · carbide
- Mitsubishi VP15TF ISO M30 P30 · not verified · carbide
- ISCAR IC8350 ISO P30 · not verified
98 more not shown.
More wear-resistant alternatives
Positioned below this grade on the ISO scale (more wear resistance, less toughness). ISO position only, not verified.
- Mitsubishi VP45N ISO P30 · not verified
- Sandvik GC1125 ISO P30 · not verified
- Sumitomo T2500A ISO P30 · not verified
- Sumitomo T2500Z ISO P30 · not verified · cermet
- Tungaloy NS9530 ISO P30 · not verified
13 more not shown.
The free check and the report show each grade with its sources: check KC735M free.
What this does and does not tell you
An ISO 513 application class says which material group and which range of operations a grade is built for. Two grades sharing a class are built for the same job. They are not identical: substrate grain, cobalt content, coating and edge preparation still differ, and so will tool life and the cutting data you should start from. Treat a candidate here as the shortlist for your own trial, not as a drop-in replacement.
Everything above is derived from the makers' own published application data. Nothing is inferred from price, availability or popularity, and no manufacturer pays to appear here.
Related candidate alternatives
- Kennametal KCM25B M15, M20
- Kennametal KC725M M30, M40, P40
- Kennametal KCPM20 M10, M20, P10
- Kennametal KC525M M20, P20, P30
- Kennametal KCPM30 M20, M30, P30
- Kennametal KC5025 K20, M30, M35, P25, S20, S25
All cross-brand grade candidates
Check Kennametal KC735M against the published chart evidence first. If this grade has a documented candidate, you can order an automatically generated report for one grade (about US$10, charged EUR 9), or add up to two grades (about US$24, charged EUR 22). Currency conversion and tax at checkout may change the USD amount. A chart comparison is not a guaranteed substitute.
Check this grade and see the report →Are you overpaying on your Kennametal KC735M inserts? Paste your insert list and get a cost audit in about 30 seconds: cross-brand candidate alternatives at the same ISO application position, and where you are likely overpaying. No signup, no sales call.
After the free check: a sourced PDF + XLSX report from EUR 9 for one grade. How buying works
Ask about your own case
Material, operation, machine — get a grade and a starting cutting data set, grounded in the same reference data.