CUTTINGTOOLS / AI
Find equivalents

Cross-brand grade equivalence · brand-neutral

Kennametal KCPM20: candidate alternatives

How to read this page. These alternatives are compiled from grade comparison charts the manufacturers publish themselves. A direct peer is a grade listed in the same row of a manufacturer comparison chart as KCPM20: that is chart comparability, not verified cutting performance and not a drop-in swap. Grades that share only the ISO 513 application position are listed apart, marked not verified. Substrate, cobalt content, coating and edge preparation still differ, and so will tool life and the cutting data you should start from. Validate any swap on a sample part before you change production. Something wrong on this page, or a grade you want removed? research@cuttingtoolsai.eu.

Kennametal KCPM20 sits at ISO 513 application classes M10, M20, P10 — stainless steel, steel. No manufacturer chart on file lists a direct peer for it. 136 grades from other makers share an ISO position with it. None has been verified.

Alternatives by evidence

Direct peers

Listed in the same row of a manufacturer comparison chart. This is chart comparability, not verified cutting performance.

No manufacturer chart on file lists a direct peer for this grade. Grades at the same ISO position are listed as not verified.

Same ISO position, not verified

These grades overlap in ISO position only. No manufacturer chart lists them together, and operation and tool material are not verified.

  • Kyocera PR1225 ISO M10 M20 P10 · not verified · carbide
  • NTK DM4 ISO M10 M20 P10 · not verified
  • Mitsubishi MC7015 ISO M10 M20 · not verified
  • Mitsubishi VP15TF ISO M10 P10 · not verified · carbide
  • NTK DT4 ISO M20 P10 · not verified

121 more not shown.

Tougher alternatives

Positioned above this grade on the ISO scale (more toughness, less wear resistance). ISO position only, not verified.

  • Kyocera PR1525 ISO M20 · not verified
  • Mitsubishi MC7025 ISO M20 · not verified
  • ISCAR IC830 ISO M20 · not verified
  • Kyocera CA6535 ISO M20 · not verified
  • Mitsubishi UP20M ISO M20 · not verified

5 more not shown.

The free check and the report show each grade with its sources: check KCPM20 free.

What this does and does not tell you

An ISO 513 application class says which material group and which range of operations a grade is built for. Two grades sharing a class are built for the same job. They are not identical: substrate grain, cobalt content, coating and edge preparation still differ, and so will tool life and the cutting data you should start from. Treat a candidate here as the shortlist for your own trial, not as a drop-in replacement.

Everything above is derived from the makers' own published application data. Nothing is inferred from price, availability or popularity, and no manufacturer pays to appear here.

Related candidate alternatives

All cross-brand grade candidates

Source-backed grade report · PDF + XLSX

Check Kennametal KCPM20 against the published chart evidence first. If this grade has a documented candidate, you can order an automatically generated report for one grade (about US$10, charged EUR 9), or add up to two grades (about US$24, charged EUR 22). Currency conversion and tax at checkout may change the USD amount. A chart comparison is not a guaranteed substitute.

Check this grade and see the report →
Cost check · free · brand-neutral

Are you overpaying on your Kennametal KCPM20 inserts? Paste your insert list and get a cost audit in about 30 seconds: cross-brand candidate alternatives at the same ISO application position, and where you are likely overpaying. No signup, no sales call.

Run a free cost audit → Check your whole grade list · free

After the free check: a sourced PDF + XLSX report from EUR 9 for one grade. How buying works

Ask about your own case

Material, operation, machine — get a grade and a starting cutting data set, grounded in the same reference data.