Cross-brand grade equivalence · brand-neutral
Sumitomo ACP100: candidate alternatives
How to read this page. These alternatives are compiled from grade comparison charts the manufacturers publish themselves. A direct peer is a grade listed in the same row of a manufacturer comparison chart as ACP100: that is chart comparability, not verified cutting performance and not a drop-in swap. Grades that share only the ISO 513 application position are listed apart, marked not verified. Substrate, cobalt content, coating and edge preparation still differ, and so will tool life and the cutting data you should start from. Validate any swap on a sample part before you change production. Something wrong on this page, or a grade you want removed? research@cuttingtoolsai.eu.
Sumitomo ACP100 sits at ISO 513 application classes P10, P20, P30 — steel. The manufacturer names a successor grade. No manufacturer chart on file lists a direct peer for it. 193 grades from other makers share an ISO position with it. None has been verified.
Alternatives by evidence
Manufacturer-stated successor
Named by the manufacturer as the follow-up grade. Same brand, listed apart from other brands.
- Sumitomo ACP2000 P / steel milling (CVD) · manufacturer source, p.27
Direct peers
Listed in the same row of a manufacturer comparison chart. This is chart comparability, not verified cutting performance.
No manufacturer chart on file lists a direct peer for this grade. Grades at the same ISO position are listed as not verified.
Same ISO position, not verified
These grades overlap in ISO position only. No manufacturer chart lists them together, and operation and tool material are not verified.
- Mitsubishi VP15TF ISO P10 P20 P30 · not verified · carbide
- ISCAR IC30N ISO P10 P20 P30 · not verified
- Tungaloy AH120 ISO P10 P20 P30 · not verified
- Kyocera PV720 ISO P10 P20 · not verified · cermet
- Kyocera TN620 ISO P10 P20 · not verified · cermet
83 more not shown.
Tougher alternatives
Positioned above this grade on the ISO scale (more toughness, less wear resistance). ISO position only, not verified.
- ISCAR IC8350 ISO P30 · not verified
- Kyocera PV730 ISO P30 · not verified · cermet
- Mitsubishi VP45N ISO P30 · not verified
- Tungaloy SH730 ISO P30 · not verified
- Kennametal KC530M ISO P30 · not verified
53 more not shown.
More wear-resistant alternatives
Positioned below this grade on the ISO scale (more wear resistance, less toughness). ISO position only, not verified.
- Kyocera PV710 ISO P10 · not verified · cermet
- Mitsubishi MS6015 ISO P10 · not verified
- Walter WPP10S ISO P10 · not verified
- Kennametal KCP10 ISO P10 · not verified
- Kyocera CA515 ISO P10 · not verified
42 more not shown.
The free check and the report show each grade with its sources: check ACP100 free.
What this does and does not tell you
An ISO 513 application class says which material group and which range of operations a grade is built for. Two grades sharing a class are built for the same job. They are not identical: substrate grain, cobalt content, coating and edge preparation still differ, and so will tool life and the cutting data you should start from. Treat a candidate here as the shortlist for your own trial, not as a drop-in replacement.
Everything above is derived from the makers' own published application data. Nothing is inferred from price, availability or popularity, and no manufacturer pays to appear here.
Related candidate alternatives
- Sumitomo ACP200 P10, P20, P30
- Sumitomo AC8020P P10, P15, P20
- Sumitomo ACP2000 P10, P20, P30
- Sumitomo AC530U K20, M30, M35, P20
- TaeguTec TT7800 M20, M30, P20, P30
- Sandvik GC4325 P20, P25, P30
All cross-brand grade candidates
Check Sumitomo ACP100 against the published chart evidence first. If this grade has a documented candidate, you can order an automatically generated report for one grade (about US$10, charged EUR 9), or add up to two grades (about US$24, charged EUR 22). Currency conversion and tax at checkout may change the USD amount. A chart comparison is not a guaranteed substitute.
Check this grade and see the report →Are you overpaying on your Sumitomo ACP100 inserts? Paste your insert list and get a cost audit in about 30 seconds: cross-brand candidate alternatives at the same ISO application position, and where you are likely overpaying. No signup, no sales call.
After the free check: a sourced PDF + XLSX report from EUR 9 for one grade. How buying works
Ask about your own case
Material, operation, machine — get a grade and a starting cutting data set, grounded in the same reference data.