CUTTINGTOOLS / AI
Find equivalents

Cross-brand grade equivalence · brand-neutral

Sandvik GC4325: candidate alternatives

How to read this page. These alternatives are compiled from grade comparison charts the manufacturers publish themselves. A direct peer is a grade listed in the same row of a manufacturer comparison chart as GC4325: that is chart comparability, not verified cutting performance and not a drop-in swap. Grades that share only the ISO 513 application position are listed apart, marked not verified. Substrate, cobalt content, coating and edge preparation still differ, and so will tool life and the cutting data you should start from. Validate any swap on a sample part before you change production. Something wrong on this page, or a grade you want removed? research@cuttingtoolsai.eu.

Sandvik GC4325 sits at ISO 513 application classes P20, P25, P30 — steel. The manufacturer names a successor grade. 17 Direct peers are from other makers, listed in the same row of a manufacturer comparison chart. This is chart comparability, not verified cutting performance. 145 more grades share an ISO position only and are not verified.

Alternatives by evidence

Manufacturer-stated successor

Named by the manufacturer as the follow-up grade. Same brand, listed apart from other brands.

Direct peers

Listed in the same row of a manufacturer comparison chart. This is chart comparability, not verified cutting performance.

  • ISCAR IC8250 ISO P20 P25 · 3 charts (Ingersoll, TaeguTec, Tungaloy)
  • Kennametal KCP25B ISO P20 P25 · 3 charts (Ingersoll, TaeguTec, Tungaloy)
  • TaeguTec TT8125B ISO P20 P25 · 3 charts (Ingersoll, TaeguTec, Tungaloy)
  • Walter WPP20G ISO P20 P25 · 3 charts (Ingersoll, TaeguTec, Tungaloy)
  • Walter WPP20S ISO P20 P25 · 3 charts (Ingersoll, TaeguTec, Tungaloy)
  • Mitsubishi MC6025 ISO P20 P25 · 2 charts (Ingersoll, Tungaloy)
  • Seco TP2501 ISO P20 P25 · 2 charts (Ingersoll, Tungaloy) · carbide
  • Tungaloy T9225 ISO P20 P25 · 2 charts (Ingersoll, Tungaloy)
  • Seco TP2500 ISO P20 P25 · 2 charts (Ingersoll, Tungaloy)
  • Kennametal KC9125 ISO P20 · 3 charts (Ingersoll, TaeguTec, Tungaloy)
  • TaeguTec TT5100 ISO P30 · 3 charts (Ingersoll, TaeguTec, Tungaloy)
  • Seco TP2000 ISO P20 · 2 charts (Ingersoll, Tungaloy)
  • Tungaloy T9025 ISO P20 · 2 charts (Ingersoll, Tungaloy)
  • Kennametal KCP25 ISO P20 · 3 charts (Ingersoll, TaeguTec, Tungaloy)
  • Ceratizit CTCP115 ISO P20 · 1 chart (Tungaloy)
  • Ceratizit CTCP125 ISO P20 · 1 chart (Tungaloy)
  • ISCAR IC9250 ISO position on file · 3 charts (Ingersoll, TaeguTec, Tungaloy)

Same ISO position, not verified

These grades overlap in ISO position only. No manufacturer chart lists them together, and operation and tool material are not verified.

  • Sumitomo AC1030U ISO P20 P25 P30 · not verified · carbide
  • Mitsubishi VP15TF ISO P20 P30 · not verified · carbide
  • Sumitomo T2500Z ISO P20 P30 · not verified · cermet
  • Tungaloy NS9530 ISO P20 P30 · not verified
  • ISCAR IC30N ISO P20 P30 · not verified

95 more not shown.

Tougher alternatives

Positioned above this grade on the ISO scale (more toughness, less wear resistance). ISO position only, not verified.

  • ISCAR IC8350 ISO P30 · not verified
  • Kyocera PR1535 ISO P30 · not verified · carbide
  • Tungaloy UX30 ISO P30 · not verified
  • ISCAR IC50M ISO P30 · not verified
  • Kennametal KCP30B ISO P30 · not verified

20 more not shown.

More wear-resistant alternatives

Positioned below this grade on the ISO scale (more wear resistance, less toughness). ISO position only, not verified.

  • Kyocera PV720 ISO P20 · not verified · cermet
  • Kyocera TN620 ISO P20 · not verified · cermet
  • Mitsubishi NX2525 ISO P20 · not verified · cermet
  • NTK DM4 ISO P20 · not verified
  • Sumitomo T1500A ISO P20 · not verified · cermet

15 more not shown.

The free check and the report show each grade with its sources: check GC4325 free.

What this does and does not tell you

An ISO 513 application class says which material group and which range of operations a grade is built for. Two grades sharing a class are built for the same job. They are not identical: substrate grain, cobalt content, coating and edge preparation still differ, and so will tool life and the cutting data you should start from. Treat a candidate here as the shortlist for your own trial, not as a drop-in replacement.

Everything above is derived from the makers' own published application data. Nothing is inferred from price, availability or popularity, and no manufacturer pays to appear here.

Related candidate alternatives

Full grade profile, coating and insert designations: Sandvik GC4325.

All cross-brand grade candidates

Source-backed grade report · PDF + XLSX

Check Sandvik GC4325 against the published chart evidence first. If this grade has a documented candidate, you can order an automatically generated report for one grade (about US$10, charged EUR 9), or add up to two grades (about US$24, charged EUR 22). Currency conversion and tax at checkout may change the USD amount. A chart comparison is not a guaranteed substitute.

Check this grade and see the report →
Cost check · free · brand-neutral

Are you overpaying on your Sandvik GC4325 inserts? Paste your insert list and get a cost audit in about 30 seconds: cross-brand candidate alternatives at the same ISO application position, and where you are likely overpaying. No signup, no sales call.

Run a free cost audit → Check your whole grade list · free

After the free check: a sourced PDF + XLSX report from EUR 9 for one grade. How buying works

Ask about your own case

Material, operation, machine — get a grade and a starting cutting data set, grounded in the same reference data.