CUTTINGTOOLS / AI
Find equivalents
Advisor / ISO GPS reference / Angularity
Orientation tolerance · ISO 1101

Angularity

Limits how far a feature may deviate from a stated angle (other than 90 degrees) to a datum.

In the shop

Symptom: the measured angle is off after the finishing pass. Likely cause: the setup, since the angle comes from the fixture or tilt rather than from the cutting parameters. First check: confirm the angle on the finished part, not only on the setup. If it is off, correct the sine fixture or the tilt setting before changing cutting data.

General shop guidance in our own words. The drawing and the standard it cites decide; verify on a sample part.

Related orientation tolerances

Parallelism · Perpendicularity

Ask about your drawing

Tell the advisor the feature, the tolerance on the drawing and the material. It answers with machining choices, brand-neutral.

Sources

Definition written in our own words and checked against keyence.com. Symbol and term names follow ISO 1101; we do not reproduce standard text. See the full index.

Shop note reviewed by our tooling specialist (carbide cutting-tool production and tool measurement background) on 12 October 2026.