CUTTINGTOOLS / AI
Find equivalents
Advisor / ISO GPS reference / Perpendicularity
Orientation tolerance · ISO 1101

Perpendicularity

Limits how far a feature may deviate from a right angle to a datum.

In the shop

Symptom: a wall or face leans against the datum. Likely cause: re-clamping between operations, or a long side-milling tool that leans with deflection. First check: find out whether the face and the datum were machined in the same clamping. If they were not, combine them in one setup; if the tool leans, use a shorter tool and finish with a sharp tool and a small radial cut that still cuts instead of rubbing.

General shop guidance in our own words. The drawing and the standard it cites decide; verify on a sample part.

Related orientation tolerances

Angularity · Parallelism

Ask about your drawing

Tell the advisor the feature, the tolerance on the drawing and the material. It answers with machining choices, brand-neutral.

Sources

Definition written in our own words and checked against keyence.com. Symbol and term names follow ISO 1101; we do not reproduce standard text. See the full index.

Shop note reviewed by our tooling specialist (carbide cutting-tool production and tool measurement background) on 12 October 2026.