CUTTINGTOOLS / AI
Find equivalents
Advisor / ISO GPS reference / Parallelism
Orientation tolerance · ISO 1101

Parallelism

Limits how far a line or plane may tilt away from being parallel to a datum.

In the shop

Symptom: the second face is tilted against the datum face. Likely cause: dirt, a burr or poor seating on the datum face after the part was flipped. First check: deburr and clean the finished datum face and the parallels or ground plate before flipping. If the error persists, machine the datum face first, then flip the part onto it, seated flat on clean parallels or a ground plate, and cut the second face.

General shop guidance in our own words. The drawing and the standard it cites decide; verify on a sample part.

Related orientation tolerances

Angularity · Perpendicularity

Ask about your drawing

Tell the advisor the feature, the tolerance on the drawing and the material. It answers with machining choices, brand-neutral.

Sources

Definition written in our own words and checked against keyence.com. Symbol and term names follow ISO 1101; we do not reproduce standard text. See the full index.

Shop note reviewed by our tooling specialist (carbide cutting-tool production and tool measurement background) on 12 October 2026.