Cylindricity
Combines straightness and circularity: how close the whole surface is to a perfect cylinder.
Symptom: a bore or shaft is round at each end but tapered, barrel shaped or bent along its length. Likely cause: tool or workpiece deflection, wear along the cut, or an axis error from the setup. First check: measure at several positions along the length, not only at the ends. If the diameter drifts along the cut, keep boring bar overhang short or support the shaft, and finish with a sharp insert at a depth of cut above the cutting edge hone radius where the part allows it.
General shop guidance in our own words. The drawing and the standard it cites decide; verify on a sample part.
Related form tolerances
Circularity · Flatness · Straightness
Tell the advisor the feature, the tolerance on the drawing and the material. It answers with machining choices, brand-neutral.
Definition written in our own words and checked against keyence.com. Symbol and term names follow ISO 1101; we do not reproduce standard text. See the full index.
Shop note reviewed by our tooling specialist (carbide cutting-tool production and tool measurement background) on 12 October 2026.