CUTTINGTOOLS / AI
Find equivalents
Advisor / ISO GPS reference / Straightness
Form tolerance · ISO 1101

Straightness

Limits how far a line or axis may bow away from a perfectly straight line.

In the shop

Symptom: a long slender part measures bowed after cutting or after release from the chuck. Likely cause: deflection under cutting force, clamping stress, or residual stress in bar stock that releases as material is removed. First check: measure the blank, then again after roughing and after unclamping. If it moves after roughing, rough, relieve the clamping and then finish; if it bows only while cutting, support the part (steady rest or tailstock) as the length to diameter ratio grows and finish with a sharp edge.

General shop guidance in our own words. The drawing and the standard it cites decide; verify on a sample part.

Related form tolerances

Circularity · Cylindricity · Flatness

Ask about your drawing

Tell the advisor the feature, the tolerance on the drawing and the material. It answers with machining choices, brand-neutral.

Sources

Definition written in our own words and checked against keyence.com. Symbol and term names follow ISO 1101; we do not reproduce standard text. See the full index.

Shop note reviewed by our tooling specialist (carbide cutting-tool production and tool measurement background) on 12 October 2026.