Cross-brand grade equivalence · brand-neutral
Sandvik GC4305: candidate alternatives
How to read this page. These alternatives are compiled from grade comparison charts the manufacturers publish themselves. A direct peer is a grade listed in the same row of a manufacturer comparison chart as GC4305: that is chart comparability, not verified cutting performance and not a drop-in swap. Grades that share only the ISO 513 application position are listed apart, marked not verified. Substrate, cobalt content, coating and edge preparation still differ, and so will tool life and the cutting data you should start from. Validate any swap on a sample part before you change production. Something wrong on this page, or a grade you want removed? research@cuttingtoolsai.eu.
Sandvik GC4305 sits at ISO 513 application classes P05, P10 — steel. 1 Direct peer is from other makers, listed in the same row of a manufacturer comparison chart. This is chart comparability, not verified cutting performance. 92 more grades share an ISO position only and are not verified.
Alternatives by evidence
Direct peers
Listed in the same row of a manufacturer comparison chart. This is chart comparability, not verified cutting performance.
- Walter WPP10S ISO P10 · 1 chart (Tungaloy)
Same ISO position, not verified
These grades overlap in ISO position only. No manufacturer chart lists them together, and operation and tool material are not verified.
- Kyocera PR1225 ISO P05 P10 · not verified · carbide
- Mitsubishi VP15TF ISO P05 P10 · not verified · carbide
- Kyocera PV710 ISO P10 · not verified · cermet
- Mitsubishi MS6015 ISO P10 · not verified
- Kennametal KC515M ISO P10 · not verified
61 more not shown.
Tougher alternatives
Positioned above this grade on the ISO scale (more toughness, less wear resistance). ISO position only, not verified.
- Mitsubishi MP6120 ISO P10 · not verified
- Mitsubishi NX2525 ISO P10 · not verified · cermet
- Sumitomo T1500Z ISO P10 · not verified · cermet
- Tungaloy J9530 ISO P10 · not verified
- ISCAR IC20N ISO P10 · not verified
21 more not shown.
The free check and the report show each grade with its sources: check GC4305 free.
What this does and does not tell you
An ISO 513 application class says which material group and which range of operations a grade is built for. Two grades sharing a class are built for the same job. They are not identical: substrate grain, cobalt content, coating and edge preparation still differ, and so will tool life and the cutting data you should start from. Treat a candidate here as the shortlist for your own trial, not as a drop-in replacement.
Everything above is derived from the makers' own published application data. Nothing is inferred from price, availability or popularity, and no manufacturer pays to appear here.
Related candidate alternatives
- Sandvik GC4325 P20, P25, P30
- Sandvik GC1125 P20, P30, S20, S25
- Sumitomo AC530U K20, M30, M35, P20
- Sandvik GC1030 M10, P30
- Sumitomo AC8020P P10, P15, P20
- Sandvik GC1025 M10, P20
All cross-brand grade candidates
Check Sandvik GC4305 against the published chart evidence first. If this grade has a documented candidate, you can order an automatically generated report for one grade (about US$10, charged EUR 9), or add up to two grades (about US$24, charged EUR 22). Currency conversion and tax at checkout may change the USD amount. A chart comparison is not a guaranteed substitute.
Check this grade and see the report →Are you overpaying on your Sandvik GC4305 inserts? Paste your insert list and get a cost audit in about 30 seconds: cross-brand candidate alternatives at the same ISO application position, and where you are likely overpaying. No signup, no sales call.
After the free check: a sourced PDF + XLSX report from EUR 9 for one grade. How buying works
Ask about your own case
Material, operation, machine — get a grade and a starting cutting data set, grounded in the same reference data.