CUTTINGTOOLS / AI
Find equivalents
Surface texture parameter · ISO 21920-2

Ra (arithmetic mean deviation)

Average absolute height deviation of the roughness profile from its mean line.

In the shop

Symptom: measured Ra is above the drawing limit. Likely cause: feed too coarse for the nose radius, plus built-up edge, vibration or a worn edge. In turning with a conventional round-nose insert, theoretical Ra is about f squared divided by (32 times the nose radius), with feed per revolution f and nose radius in mm; multiply the mm result by 1000 for micrometres. For example, 0.2 mm/rev and a 0.8 mm radius give about 1.6 micrometres, and manufacturer tables can differ slightly (Sandvik lists 1.25 for these values). This is an approximate lower value for ideal geometry, not a prediction, and real surfaces can be rougher. Wiper inserts are outside this calculation; the manufacturer rule is about the same Ra at roughly twice the feed. First check: confirm measurement direction, cutoff and evaluation length match the drawing; if no direction is given, ISO 4288 measures where the value is greatest, usually across the machining marks. If the gap to theory is large, check wear and vibration; a larger nose radius lowers the theoretical value, but if vibration appears a smaller radius is the usual first change.

General shop guidance in our own words. The drawing and the standard it cites decide; verify on a sample part.

Typical finish by process and the turning feed and nose-radius formula: Surface finish guide.

Related surface roughness parameters

Rq · Rsk · Rz

Ask about your drawing

Tell the advisor the feature, the tolerance on the drawing and the material. It answers with machining choices, brand-neutral.

Sources

Definition written in our own words and checked against sandvik.coromant.com. Symbol and term names follow ISO 21920-2; we do not reproduce standard text. See the full index.

Shop note reviewed by our tooling specialist (carbide cutting-tool production and tool measurement background) on 12 October 2026.