CUTTINGTOOLS / AI
Find equivalents
Surface texture parameter · ISO 21920-2

Rq (root mean square deviation)

Root mean square of the roughness profile height deviations.

In the shop

Symptom: a drawing gives Rq but the shop gauge reports Ra. Likely cause: they are different averages; Rq is the root mean square of the heights, so it reads higher than Ra on the same surface. It is about 1.11 times Ra for a sine-like profile and about 1.25 times for a Gaussian height distribution; these are typical values, not an upper limit. First check: confirm which parameter the drawing asks for and which the instrument reports. If they differ, do not swap the numbers; set the instrument to report Rq.

General shop guidance in our own words. The drawing and the standard it cites decide; verify on a sample part.

Typical finish by process and the turning feed and nose-radius formula: Surface finish guide.

Related surface roughness parameters

Ra · Rsk · Rz

Ask about your drawing

Tell the advisor the feature, the tolerance on the drawing and the material. It answers with machining choices, brand-neutral.

Sources

Definition written in our own words and checked against keyence.com. Symbol and term names follow ISO 21920-2; we do not reproduce standard text. See the full index.

Shop note reviewed by our tooling specialist (carbide cutting-tool production and tool measurement background) on 12 October 2026.