Rz (maximum height of profile)
Sum of the highest peak and deepest valley of the roughness profile within the evaluated section.
Symptom: peak-to-valley height is above the drawing limit. Likely cause: feed coarse for the nose radius, or scratches and tool marks. In the same ideal turning case the theoretical peak-to-valley height is about f squared divided by (8 times the nose radius), roughly four times the theoretical Ra; 0.2 mm/rev and a 0.8 mm radius give about 6.3 micrometres. This is a theoretical profile height (close to Rt), not the Rz of any one standard, because the Rz definition differs between ISO 21920-2 and ASME B46.1, and wiper inserts are outside the formula. First check: confirm which standard's Rz the drawing means. If the real value is far above the theoretical one, check wear, vibration and built-up edge.
General shop guidance in our own words. The drawing and the standard it cites decide; verify on a sample part.
Typical finish by process and the turning feed and nose-radius formula: Surface finish guide.
Related surface roughness parameters
Tell the advisor the feature, the tolerance on the drawing and the material. It answers with machining choices, brand-neutral.
Definition written in our own words and checked against keyence.com. Symbol and term names follow ISO 21920-2; we do not reproduce standard text. See the full index.
Shop note reviewed by our tooling specialist (carbide cutting-tool production and tool measurement background) on 12 October 2026.