Rsk (skewness)
Asymmetry of the height distribution: negative means valley-dominated, positive means peak-dominated.
Symptom: Rsk is negative and it is unclear whether the surface is good. Likely cause: negative skew means the height distribution is valley-dominated, which can come from a plateau-like surface but equally from deep scratches or pits; positive means peak-dominated, and near zero is a roughly even mix. First check: look at the profile and the material ratio (bearing) curve, because the sign alone does not show a load-carrying plateau. If the surface must carry load or hold lubricant, specify it with curve-based parameters or the process, and read Rsk together with Ra, not as a finish grade.
General shop guidance in our own words. The drawing and the standard it cites decide; verify on a sample part.
Typical finish by process and the turning feed and nose-radius formula: Surface finish guide.
Related surface roughness parameters
Tell the advisor the feature, the tolerance on the drawing and the material. It answers with machining choices, brand-neutral.
Definition written in our own words and checked against keyence.com. Symbol and term names follow ISO 21920-2; we do not reproduce standard text. See the full index.
Shop note reviewed by our tooling specialist (carbide cutting-tool production and tool measurement background) on 12 October 2026.