Carbide grade · Kennametal · ISO P
Kennametal KC5010
KC5010 is a Kennametal carbide insert grade (KENGold™), applied in the ISO P area. In this cross-reference it appears on 1 insert designation with 3 comparable grades from ISCAR, Sandvik, Walter. Equivalents share the insert geometry, not the process — verify on a sample part before switching.
Grade summary — Kennametal KC5010
- Brand
- Kennametal
- Coating / substrate
- KENGold™
- ISO application area
- P — steel
- Application range (catalog)
- P15–P30
- Used in
- 1 insert designation in this reference
Equivalent grades — cross-referenced by shared geometry
| Brand | Grade | Coating | Shared designations |
|---|---|---|---|
| ISCAR | IC8250 | SUMO TEC® PVD | APMT1604PDER |
| Sandvik | GC4220 | PVD TiAlN | APMT1604PDER |
| Walter | WPP20S | Tiger·tec® Silver | APMT1604PDER |
Check Kennametal KC5010 against the published chart evidence first. If this grade has a documented candidate, you can order an automatically generated report for one grade (about US$10, charged EUR 9), or add up to two grades (about US$24, charged EUR 22). Currency conversion and tax at checkout may change the USD amount. A chart comparison is not a guaranteed substitute.
Check this grade and see the report →Compare KC5010 side by side
Insert designations using KC5010
| Designation | Geometry | Catalog code | Application |
|---|---|---|---|
| APMT1604PDER | Parallelogram · 11° clearance (positive) · face milling | APMT 160404 PDER KC5010 | P15–P30 |
Are you overpaying on your KC5010 inserts? Paste your insert list and get a cost audit in about 30 seconds: cross-brand candidate alternatives at the same ISO application position, and where you are likely overpaying. No signup, no sales call.
After the free check: a sourced PDF + XLSX report from about USD 10 (EUR 9) per grade. How buying works
Frequently asked questions
What is Kennametal KC5010?
KC5010 is a Kennametal carbide insert grade (KENGold™), applied in the ISO P area, used in 1 insert designation in this reference.
Which grades are comparable to KC5010?
Comparable grades at the same ISO application position include ISCAR IC8250, Sandvik GC4220, Walter WPP20S. Equivalents share the insert geometry, not the process — treat them as starting points and verify on a sample part before switching.
Does this cross-reference favour specific brands?
No. Comparable grades appear here only because manufacturer-published comparison charts place them at the same ISO application position. No manufacturer pays for placement, nothing on this page is sponsored, and CuttingToolsAI sells no tools and earns no commission. Placements backed by a single chart are flagged as such, and every comparison ends the same way: verify on a sample part before switching.
Grade charts by brand
Related grades
Where KC5010 is used: designations and materials