CUTTINGTOOLS / AI
Find equivalents

Carbide grade · Kennametal

Kennametal KCU10B

KCU10B is a Kennametal carbide insert grade (PVD AlTiN). In this cross-reference it appears on 1 insert designation; the same insert geometry is also made by ISCAR, Tungaloy. No manufacturer chart on file lists a direct peer for it. Same position is not the same performance: verify on a sample part before switching.

Same ISO position in the manufacturer charts, with the source on the full page. Running several grades? Separate them with commas to check the whole list. No signup.

Every maker's AI recommends its own tools. Ours compares all makers and shows the published source behind each answer, or tells you it could not verify.

Grade summary

Brand
Kennametal
Coating / substrate
PVD AlTiN
Application range (catalog)
universal · incl. S
Used in
1 insert designation in this reference

Cross-brand alternatives (manufacturer charts)

Direct peers

Listed in the same row of a manufacturer comparison chart. This is chart comparability, not verified cutting performance.

No manufacturer chart on file lists a direct peer for this grade. Grades at the same ISO position are listed as not verified.

Check KCU10B with your other grades →

Same insert geometry, other brands

These makers produce the same insert designation in their own grade. Shared geometry is not a grade equivalence.

BrandGradeCoatingShared designations
ISCAR IC806 PVD TiAlN (SUMO TEC®) RCMT1204
Tungaloy AH8015 PVD AlTiN RCMT1204

Insert designations using KCU10B

DesignationGeometryCatalog codeApplication
RCMT1204 Round · 7° clearance · 12mm diameter · 4.76mm thick RCMT 120400 KCU10B universal · incl. S

Frequently asked questions

What is Kennametal KCU10B?

KCU10B is a Kennametal carbide insert grade (PVD AlTiN), used in 1 insert designation in this reference.

Does this cross-reference favour specific brands?

No. Comparable grades appear here only because manufacturer-published comparison charts place them at the same ISO application position. No manufacturer pays for placement, nothing on this page is sponsored, and CuttingToolsAI sells no tools and earns no commission. Placements backed by a single chart are flagged as such, and every comparison ends the same way: verify on a sample part before switching.

Grade charts by brand

Ask the AI advisor about KCU10B
Cutting data for your material, when KCU10B is the right call versus its equivalents, and what to check before switching — answered with verified reference data plus live search. Edit the question and hit Ask — 3 free answers a day, no account.
Cost check · free · brand-neutral

Are you overpaying on your KCU10B inserts? Paste your insert list and get a cost audit in about 30 seconds: cross-brand candidate alternatives at the same ISO application position, and where you are likely overpaying. No signup, no sales call.

Run a free cost audit → Check your whole grade list · free

After the free check: a sourced PDF + XLSX report from EUR 9 for one grade. How buying works

Related grades