Carbide grade · Walter · ISO S10
Walter WSM01
WSM01 is a Walter carbide turning insert grade placed at the ISO S10 application position (superalloys & titanium) in manufacturer-published grade comparison charts. 1 Direct peer is from other makers, listed in the same row of a manufacturer comparison chart. This is chart comparability, not verified cutting performance. 63 more grades share an ISO position only and are not verified. Sharing an ISO position is a chart placement, not a claim the grades are interchangeable — verify on a sample part before switching.
Candidate cross-brand alternatives for Walter WSM01, with the manufacturer charts behind each match: Walter WSM01 equivalents.
Grade summary — Walter WSM01
| Brand | Walter |
|---|---|
| ISO application position | S10 — superalloys & titanium |
| Coating / substrate | Not verified in the reference charts |
| Placement evidence | Candidate: named by 2+ manufacturer-published charts |
| Chart sources | Ingersoll turning grade cross-reference (live-fetched 2026-07-14), TaeguTec grade comparison table, Tungaloy grade comparison chart, Mitsubishi Materials grades comparison table, Reliable Industrial Supply chart |
Alternatives by evidence
Direct peers
Listed in the same row of a manufacturer comparison chart. This is chart comparability, not verified cutting performance.
- Sandvik GC1105 ISO M10 S05 S10 · 2 charts (Ingersoll, Tungaloy)
Same ISO position, not verified
These grades overlap in ISO position only. No manufacturer chart lists them together, and operation and tool material are not verified.
- Tungaloy TH10 ISO M10 S10 · not verified
- Kyocera CA6515 ISO M10 · not verified
- Kyocera PR1225 ISO M10 · not verified · carbide
- Mitsubishi MC7015 ISO M10 · not verified
- Seco TM1501 ISO M10 · not verified
56 more not shown.
Tougher alternatives
Positioned above this grade on the ISO scale (more toughness, less wear resistance). ISO position only, not verified.
- Seco CP200 ISO S10 · not verified
- TaeguTec TT3020 ISO S10 · not verified
Check Walter WSM01 against the published chart evidence first. If this grade has a documented candidate, you can order an automatically generated report for one grade (about US$10, charged EUR 9), or add up to two grades (about US$24, charged EUR 22). Currency conversion and tax at checkout may change the USD amount. A chart comparison is not a guaranteed substitute.
Check this grade and see the report →Ask the AI advisor about WSM01
Cutting data for your material, when WSM01 is the right call versus its chart-listed alternatives, and what to check before switching — answered with verified reference data plus live search.
Frequently asked questions
What is Walter WSM01?
WSM01 is a Walter carbide turning insert grade. Manufacturer-published grade comparison charts place it at the ISO S10 application position (superalloys & titanium). Coating and substrate details are not verified in the reference charts.
Which grades are direct peers of WSM01?
1 grade from another maker is listed in the same row of a manufacturer comparison chart as WSM01: Sandvik GC1105. This is chart comparability, not verified cutting performance. Grades that share only the ISO position are listed separately as not verified. Same position is not the same performance: verify on a sample part before switching.
Is a comparable grade a drop-in replacement for WSM01?
No. The charts confirm the application position only. Chipbreaker geometry, coating and edge preparation differ between brands, so always test the alternative on a sample part and compare tool life before committing production.
Does this cross-reference favour specific brands?
No. Comparable grades appear here only because manufacturer-published comparison charts place them at the same ISO application position. No manufacturer pays for placement, nothing on this page is sponsored, and CuttingToolsAI sells no tools and earns no commission. Placements backed by a single chart are flagged as such, and every comparison ends the same way: verify on a sample part before switching.
Grade charts by brand
Are you overpaying on your WSM01 inserts? Paste your insert list and get a cost audit in about 30 seconds: cross-brand candidate alternatives at the same ISO application position, and where you are likely overpaying. No signup, no sales call.
After the free check: a sourced PDF + XLSX report from about USD 10 (EUR 9) per grade. How buying works
Related grades
Sandvik GC1105 Sandvik GC1115 ISCAR IC806 Kennametal KC5010 All grades →
Where WSM01 is used: designations and materials