CUTTINGTOOLS / AI
Find equivalents

Carbide grade · Sandvik · ISO S10

Sandvik GC1115

GC1115 is a Sandvik carbide turning insert grade placed at the ISO S10 application position (superalloys & titanium) in manufacturer-published grade comparison charts. 11 Direct peers are from other makers, listed in the same row of a manufacturer comparison chart. This is chart comparability, not verified cutting performance. 33 more grades share an ISO position only and are not verified. Sharing an ISO position is a chart placement, not a claim the grades are interchangeable — verify on a sample part before switching.

Same ISO position in the manufacturer charts, with the source on the full page. Running several grades? Separate them with commas to check the whole list. No signup.

Every maker's AI recommends its own tools. Ours compares all makers and shows the published source behind each answer, or tells you it could not verify.

Grade summary — Sandvik GC1115

BrandSandvik
ISO application positionS10 — superalloys & titanium
Coating / substrateNot verified in the reference charts
Placement evidenceCandidate: named by 2+ manufacturer-published charts
Chart sourcesIngersoll turning grade cross-reference (live-fetched 2026-07-14), TaeguTec grade comparison table, Tungaloy grade comparison chart, Mitsubishi Materials grades comparison table, Reliable Industrial Supply chart

Alternatives by evidence

Direct peers

Listed in the same row of a manufacturer comparison chart. This is chart comparability, not verified cutting performance.

  • Walter WSM10S ISO S10 S15 · 2 charts (Ingersoll, Tungaloy)
  • Seco TS2000 ISO M15 S15 · 2 charts (Ingersoll, Tungaloy)
  • Kennametal KC5010 ISO S10 S15 · 1 chart (Tungaloy)
  • Tungaloy AH120 ISO M15 S10 · 1 chart (Ingersoll)
  • Seco TH1500 ISO S10 · 2 charts (Ingersoll, Tungaloy)
  • Kennametal KCU10 ISO S15 · 1 chart (Tungaloy)
  • Mitsubishi MP9015 ISO S10 · 1 chart (Ingersoll)
  • Tungaloy AH8015 ISO S10 · 1 chart (Ingersoll)
  • ISCAR IC806 ISO S10 · 1 chart (Ingersoll)
  • TaeguTec TT3020 ISO S10 · 1 chart (Ingersoll)
  • Mitsubishi VP15TF ISO M10 M30 M35 S20 S25 · 1 chart (Ingersoll) · carbide

Same ISO position, not verified

These grades overlap in ISO position only. No manufacturer chart lists them together, and operation and tool material are not verified.

  • TaeguTec TT3010 ISO S10 S15 · not verified
  • TaeguTec TT5080 ISO M15 S10 · not verified
  • Tungaloy TH10 ISO S10 · not verified
  • Kennametal KCM25B ISO M15 · not verified
  • Seco CP500 ISO M15 · not verified

28 more not shown.

Source-backed grade report · PDF + XLSX

Check Sandvik GC1115 against the published chart evidence first. If this grade has a documented candidate, you can order an automatically generated report for one grade (about US$10, charged EUR 9), or add up to two grades (about US$24, charged EUR 22). Currency conversion and tax at checkout may change the USD amount. A chart comparison is not a guaranteed substitute.

Check this grade and see the report →

Ask the AI advisor about GC1115

Cutting data for your material, when GC1115 is the right call versus its chart-listed alternatives, and what to check before switching — answered with verified reference data plus live search.

Frequently asked questions

What is Sandvik GC1115?

GC1115 is a Sandvik carbide turning insert grade. Manufacturer-published grade comparison charts place it at the ISO S10 application position (superalloys & titanium). Coating and substrate details are not verified in the reference charts.

Which grades are direct peers of GC1115?

11 grades from other makers are listed in the same row of a manufacturer comparison chart as GC1115: Walter WSM10S, Seco TS2000, Kennametal KC5010, Tungaloy AH120, Seco TH1500, Kennametal KCU10, Mitsubishi MP9015, Tungaloy AH8015, ISCAR IC806, TaeguTec TT3020, Mitsubishi VP15TF. This is chart comparability, not verified cutting performance. Grades that share only the ISO position are listed separately as not verified. Same position is not the same performance: verify on a sample part before switching.

Is a comparable grade a drop-in replacement for GC1115?

No. The charts confirm the application position only. Chipbreaker geometry, coating and edge preparation differ between brands, so always test the alternative on a sample part and compare tool life before committing production.

Does this cross-reference favour specific brands?

No. Comparable grades appear here only because manufacturer-published comparison charts place them at the same ISO application position. No manufacturer pays for placement, nothing on this page is sponsored, and CuttingToolsAI sells no tools and earns no commission. Placements backed by a single chart are flagged as such, and every comparison ends the same way: verify on a sample part before switching.

Grade charts by brand

Cost check · free · brand-neutral

Are you overpaying on your GC1115 inserts? Paste your insert list and get a cost audit in about 30 seconds: cross-brand candidate alternatives at the same ISO application position, and where you are likely overpaying. No signup, no sales call.

Run a free cost audit → Check your whole grade list · free

After the free check: a sourced PDF + XLSX report from about USD 10 (EUR 9) per grade. How buying works

Related grades

Sandvik GC1105 Walter WSM01 ISCAR IC806 Kennametal KC5010 All grades →

Where GC1115 is used: designations and materials