Carbide grade · Walter · ISO P/K
Walter WSP45S
WSP45S is a Walter carbide insert grade (CVD multilayer), applied in the ISO P and K areas. In this cross-reference it appears on 1 insert designation with 6 comparable grades from ISCAR, Kennametal, Mitsubishi, Sandvik, Seco, Tungaloy. Equivalents share the insert geometry, not the process — verify on a sample part before switching.
Newer grade listed by the maker
Walter lists Walter WSP45G against WSP45S in its own documents. That is a maker-stated successor, not a discontinuation notice: see the source and what to check before switching →
Grade summary — Walter WSP45S
- Brand
- Walter
- Coating / substrate
- CVD multilayer
- ISO application area
- P — steel · K — cast iron
- Application range (catalog)
- P15–K30
- Used in
- 1 insert designation in this reference
Equivalent grades — cross-referenced by shared geometry
| Brand | Grade | Coating | Shared designations |
|---|---|---|---|
| ISCAR | IC908 | PVD TiAlN | WCMX050308 |
| Kennametal | KC7310 | CVD | WCMX050308 |
| Mitsubishi | VP15TF | PVD TiAlN nano | WCMX050308 |
| Sandvik | GC3040 | CVD-coated | WCMX050308 |
| Seco | SD205 | CVD TiCN/Al₂O₃ | WCMX050308 |
| Tungaloy | T6130 | AH CVD | WCMX050308 |
Check Walter WSP45S against the published chart evidence first. If this grade has a documented candidate, you can order an automatically generated report for one grade (about US$10, charged EUR 9), or add up to two grades (about US$24, charged EUR 22). Currency conversion and tax at checkout may change the USD amount. A chart comparison is not a guaranteed substitute.
Check this grade and see the report →Compare WSP45S side by side
Insert designations using WSP45S
| Designation | Geometry | Catalog code | Application |
|---|---|---|---|
| WCMX050308 | 80° Trigon · 0° clearance · 5mm IC · indexable drill insert | WCMX 05T308-R57 WSP45S | P15–K30 |
Are you overpaying on your WSP45S inserts? Paste your insert list and get a cost audit in about 30 seconds: cross-brand candidate alternatives at the same ISO application position, and where you are likely overpaying. No signup, no sales call.
After the free check: a sourced PDF + XLSX report from about USD 10 (EUR 9) per grade. How buying works
Frequently asked questions
What is Walter WSP45S?
WSP45S is a Walter carbide insert grade (CVD multilayer), applied in the ISO P and K areas, used in 1 insert designation in this reference.
Which grades are comparable to WSP45S?
Comparable grades at the same ISO application position include ISCAR IC908, Kennametal KC7310, Mitsubishi VP15TF, Sandvik GC3040, Seco SD205, Tungaloy T6130. Equivalents share the insert geometry, not the process — treat them as starting points and verify on a sample part before switching.
Does this cross-reference favour specific brands?
No. Comparable grades appear here only because manufacturer-published comparison charts place them at the same ISO application position. No manufacturer pays for placement, nothing on this page is sponsored, and CuttingToolsAI sells no tools and earns no commission. Placements backed by a single chart are flagged as such, and every comparison ends the same way: verify on a sample part before switching.
Grade charts by brand
Related grades
Where WSP45S is used: designations and materials