Insert cross-reference · 80° Trigon · 0° clearance · 8mm IC · 1.2mm Rε (roughing)
WNMG080412 Cross Reference / ANSI WNMG 433
Equivalent WNMG080412 inserts across 7 brands — Sandvik, ISCAR, Kennametal, Walter, Tungaloy, Seco, Mitsubishi. In US (inch, ANSI B212.4) catalogs this same insert is listed as WNMG 433 — identical geometry, different designation system. Same ISO 1832 geometry class; grades, coatings and application windows differ by manufacturer. Treat equivalents as starting points and verify on a sample part: a cross-reference matches the geometry, not the process.
This is the roughing size of the family: the larger nose radius gives a stronger corner for heavier depths of cut and interrupted work, but raises radial force and the tendency to chatter on slender parts.
| Brand | Designation / grade | Coating | Application |
|---|---|---|---|
| Sandvik | WNMG080412 GC4315 | Inveio® CVD | P10–P20 |
| ISCAR | WNMG080412 IC8150 | SUMO TEC® CVD Al₂O₃ | P10–P20 |
| Kennametal | WNMG080412 KCP10B | KENGold™ CVD | P10–P20 |
| Walter | WNMG080412 WPP10S | Tiger·tec® Silver CVD | P10–P20 |
| Tungaloy | WNMG080412 T9115 | CVD TiCN/Al₂O₃ | P10–P20 |
| Seco | WNMG080412 TP1500 | Duratomic® CVD | P10–P20 |
| Mitsubishi | WNMG080412 MC6015 | CVD Al₂O₃ | P10–P20 |
Grades used Sandvik GC4315 · ISCAR IC8150 · Kennametal KCP10B · Walter WPP10S · Tungaloy T9115 · Seco TP1500 · Mitsubishi MC6015
21 brands list WNMG080412 in their published standard programs, with 2,219 catalog variants across chipbreakers, grades and coatings. Variant count shows how deep each maker's standard range goes for this geometry. It is not a quality ranking.
| Brand | Catalog variants |
|---|---|
| Sumitomo | 404 |
| Mitsubishi Materials | 247 |
| Kyocera | 225 |
| Kennametal | 196 |
| Sandvik-Coromant | 173 |
| Walter | 147 |
| Tungaloy | 134 |
| Widia | 116 |
| SECO Tools | 105 |
| Ingersoll | 82 |
| Korloy | 82 |
| Iscar | 62 |
| Hoffmann Group | 55 |
| ZCC Cutting Tools | 51 |
| Boehlerit | 46 |
| Ceratizit | 45 |
| WNT | 24 |
| Ceramtec | 13 |
| Hahn+Kolb | 6 |
| MOLDINO Tool Engineering | 3 |
| Misumi | 3 |
Hoffmann Group and Hahn+Kolb are distributor private-label programs (GARANT, ATORN). Counts are catalog listings, not stock levels. Availability varies by region and distributor.
- W — shape
- trigon (80°)
- N — clearance angle
- relief angle 0° (negative insert, double-sided use possible)
- M — tolerance
- class M — molded, medium tolerance on inscribed circle and corner point (typically ±0.05–0.13 mm depending on size)
- G — type
- cylindrical fixing hole, chipbreaker on both faces (double-sided insert)
- 08 — cutting edge length / IC
- 8 mm nominal (inscribed circle / edge length class)
- 04 — thickness
- insert thickness 4.76 mm
- 12 — corner radius
- Rε = 1.2 mm nose radius
Type any maker's grade (e.g. GC4325, AC820P, T9215) to see grades other brands publish at the same ISO application position. VERIFIED = multi-source consensus; 2+ CHARTS = placement independently confirmed by two or more manufacturer charts; SINGLE-SOURCE = one chart only. Comparable at ISO position — not identical performance. Verify on a sample part.
Are you overpaying on your WNMG080412 inserts? Paste your insert list and get a cost audit in about 30 seconds: cross-brand equivalents at the same ISO application position, and where you are likely overpaying. No signup, no sales call.
Related designations