Carbide grade · Tungaloy · ISO P/M
Tungaloy T9115
T9115 is a Tungaloy carbide insert grade (CVD TiCN/Al₂O₃), applied in the ISO P/M areas. In this cross-reference it appears on 11 insert designations; the same insert geometry is also made by ISCAR, Kennametal, Mitsubishi, Sandvik, Seco, Walter. No manufacturer chart on file lists a direct peer for it. Same position is not the same performance: verify on a sample part before switching.
Grade summary
- Brand
- Tungaloy
- Coating / substrate
- CVD TiCN/Al₂O₃
- ISO application area
- P — steel · M — stainless steel
- Application range (catalog)
- P10–P20
- Used in
- 11 insert designations in this reference
Cross-brand alternatives (manufacturer charts)
Direct peers
Listed in the same row of a manufacturer comparison chart. This is chart comparability, not verified cutting performance.
No manufacturer chart on file lists a direct peer for this grade. Grades at the same ISO position are listed as not verified.
Same insert geometry, other brands
These makers produce the same insert designation in their own grade. Shared geometry is not a grade equivalence.
Insert designations using T9115
| Designation | Geometry | Catalog code | Application |
|---|---|---|---|
| CCMT09T304 | 80° Diamond · 7° clearance (positive) · precision finishing | CCMT09T304 T9115 | P10–P20 |
| CCMT09T308 | 80° Diamond · 7° clearance (positive) · 0.8mm Rε | CCMT09T308 T9115 | P10–P20 |
| DCMT11T304 | 55° Diamond · 7° clearance (positive) · 0.4mm Rε | DCMT11T304 T9115 | P10–P20 |
| TCMT16T304 | 60° Triangle · 7° clearance (positive) · 0.4mm Rε | TCMT16T304 T9115 | P10–P20 |
| TNMG160404 | 60° Triangle · 0° clearance · 16mm IC · 0.4mm Rε · semi-finishing | TNMG160404 T9115 | P10–P20 |
| VBMT160404 | 35° Rhombic · 5° clearance · 16mm IC · 0.4mm Rε · tight corner finishing | VBMT160404 T9115 | P10–P20 |
| VBMT160408 | 35° Rhombic · 5° clearance · 16mm IC · 0.8mm Rε | VBMT160408 T9115 | P10–P20 |
| WNMG060408 | 80° Trigon · 0° clearance · 6mm IC · 0.8mm Rε · small diameter turning | WNMG060408 T9115 | P10–P20 |
| WNMG080404 | 80° Trigon · 0° clearance · 8mm IC · 0.4mm Rε (finishing) | WNMG080404 T9115 | P10–P20 |
| WNMG080408 | 80° Trigon · 0° clearance · 8mm IC · 0.8mm Rε | WNMG080408 T9115 | P10–P20 |
| WNMG080412 | 80° Trigon · 0° clearance · 8mm IC · 1.2mm Rε (roughing) | WNMG080412 T9115 | P10–P20 |
Frequently asked questions
What is Tungaloy T9115?
T9115 is a Tungaloy carbide insert grade (CVD TiCN/Al₂O₃), applied in the ISO P/M areas, used in 11 insert designations in this reference.
Does this cross-reference favour specific brands?
No. Comparable grades appear here only because manufacturer-published comparison charts place them at the same ISO application position. No manufacturer pays for placement, nothing on this page is sponsored, and CuttingToolsAI sells no tools and earns no commission. Placements backed by a single chart are flagged as such, and every comparison ends the same way: verify on a sample part before switching.
Grade charts by brand
Are you overpaying on your T9115 inserts? Paste your insert list and get a cost audit in about 30 seconds: cross-brand candidate alternatives at the same ISO application position, and where you are likely overpaying. No signup, no sales call.
After the free check: a sourced PDF + XLSX report from EUR 9 for one grade. How buying works
Related grades
Where T9115 is used: designations and materials