CUTTINGTOOLS / AI
Find equivalents

Carbide grade · Seco · ISO N

Seco H15F

H15F is a Seco carbide insert grade (Uncoated fine-grain carbide), applied in the ISO N area. In this cross-reference it appears on 1 insert designation; the same insert geometry is also made by ISCAR, Kennametal, Sandvik, Tungaloy, Walter. No manufacturer chart on file lists a direct peer for it. Same position is not the same performance: verify on a sample part before switching.

Same ISO position in the manufacturer charts, with the source on the full page. Running several grades? Separate them with commas to check the whole list. No signup.

Every maker's AI recommends its own tools. Ours compares all makers and shows the published source behind each answer, or tells you it could not verify.

Grade summary

Brand
Seco
Coating / substrate
Uncoated fine-grain carbide
ISO application area
N — non-ferrous (aluminium, copper)
Application range (catalog)
N01–N10
Used in
1 insert designation in this reference

Cross-brand alternatives (manufacturer charts)

Direct peers

Listed in the same row of a manufacturer comparison chart. This is chart comparability, not verified cutting performance.

No manufacturer chart on file lists a direct peer for this grade. Grades at the same ISO position are listed as not verified.

Check H15F with your other grades →

Same insert geometry, other brands

These makers produce the same insert designation in their own grade. Shared geometry is not a grade equivalence.

BrandGradeCoatingShared designations
ISCAR IC28 Uncoated carbide VCGT160404
Kennametal KCU25 PVD AlTiN VCGT160404
Sandvik H13A Uncoated carbide VCGT160404
Tungaloy T1010 Uncoated VCGT160404
Walter WNK10 Uncoated sharp VCGT160404

Insert designations using H15F

DesignationGeometryCatalog codeApplication
VCGT160404 35° Rhombic · 7° clearance · 0.4mm Rε · positive aluminium VCGT 16 04 04-AL H15F N01–N10

Frequently asked questions

What is Seco H15F?

H15F is a Seco carbide insert grade (Uncoated fine-grain carbide), applied in the ISO N area, used in 1 insert designation in this reference.

Does this cross-reference favour specific brands?

No. Comparable grades appear here only because manufacturer-published comparison charts place them at the same ISO application position. No manufacturer pays for placement, nothing on this page is sponsored, and CuttingToolsAI sells no tools and earns no commission. Placements backed by a single chart are flagged as such, and every comparison ends the same way: verify on a sample part before switching.

Grade charts by brand

Ask the AI advisor about H15F
Cutting data for your material, when H15F is the right call versus its equivalents, and what to check before switching — answered with verified reference data plus live search. Edit the question and hit Ask — 3 free answers a day, no account.
Cost check · free · brand-neutral

Are you overpaying on your H15F inserts? Paste your insert list and get a cost audit in about 30 seconds: cross-brand candidate alternatives at the same ISO application position, and where you are likely overpaying. No signup, no sales call.

Run a free cost audit → Check your whole grade list · free

After the free check: a sourced PDF + XLSX report from EUR 9 for one grade. How buying works

Related grades

Where H15F is used: designations and materials