CUTTINGTOOLS / AI
Find equivalents

Carbide grade · Tungaloy · ISO N

Tungaloy T1010

T1010 is a Tungaloy carbide insert grade (Uncoated), applied in the ISO N area. In this cross-reference it appears on 4 insert designations; the same insert geometry is also made by ISCAR, Kennametal, Sandvik, Seco, Walter. No manufacturer chart on file lists a direct peer for it. Same position is not the same performance: verify on a sample part before switching.

Same ISO position in the manufacturer charts, with the source on the full page. Running several grades? Separate them with commas to check the whole list. No signup.

Every maker's AI recommends its own tools. Ours compares all makers and shows the published source behind each answer, or tells you it could not verify.

Grade summary

Brand
Tungaloy
Coating / substrate
Uncoated
ISO application area
N — non-ferrous (aluminium, copper)
Application range (catalog)
N01–N10
Used in
4 insert designations in this reference

Cross-brand alternatives (manufacturer charts)

Direct peers

Listed in the same row of a manufacturer comparison chart. This is chart comparability, not verified cutting performance.

No manufacturer chart on file lists a direct peer for this grade. Grades at the same ISO position are listed as not verified.

Check T1010 with your other grades →

Same insert geometry, other brands

These makers produce the same insert designation in their own grade. Shared geometry is not a grade equivalence.

BrandGradeCoatingShared designations
ISCAR IC28 Uncoated carbide CCGT09T304, DCGT11T304, TCGT16T304, VCGT160404
Kennametal KCU25 PVD AlTiN CCGT09T304, DCGT11T304, TCGT16T304, VCGT160404
Sandvik H13A Uncoated carbide CCGT09T304, DCGT11T304, TCGT16T304, VCGT160404
Seco H15F Uncoated fine-grain carbide VCGT160404
Walter WNK10 Uncoated sharp CCGT09T304, DCGT11T304, TCGT16T304, VCGT160404

Insert designations using T1010

DesignationGeometryCatalog codeApplication
CCGT09T304 80° Diamond · 7° clearance · 0.4mm Rε · aluminium geometry CCGT09T304-AL T1010 N01–N10
DCGT11T304 55° Diamond · 7° clearance · 0.4mm Rε · positive aluminium DCGT11T304-AL T1010 N01–N10
TCGT16T304 60° Triangle · 7° clearance · 0.4mm Rε · aluminium geometry TCGT16T304-AL T1010 N01–N10
VCGT160404 35° Rhombic · 7° clearance · 0.4mm Rε · positive aluminium VCGT160404-AL T1010 N01–N10

Frequently asked questions

What is Tungaloy T1010?

T1010 is a Tungaloy carbide insert grade (Uncoated), applied in the ISO N area, used in 4 insert designations in this reference.

Does this cross-reference favour specific brands?

No. Comparable grades appear here only because manufacturer-published comparison charts place them at the same ISO application position. No manufacturer pays for placement, nothing on this page is sponsored, and CuttingToolsAI sells no tools and earns no commission. Placements backed by a single chart are flagged as such, and every comparison ends the same way: verify on a sample part before switching.

Grade charts by brand

Ask the AI advisor about T1010
Cutting data for your material, when T1010 is the right call versus its equivalents, and what to check before switching — answered with verified reference data plus live search. Edit the question and hit Ask — 3 free answers a day, no account.
Cost check · free · brand-neutral

Are you overpaying on your T1010 inserts? Paste your insert list and get a cost audit in about 30 seconds: cross-brand candidate alternatives at the same ISO application position, and where you are likely overpaying. No signup, no sales call.

Run a free cost audit → Check your whole grade list · free

After the free check: a sourced PDF + XLSX report from EUR 9 for one grade. How buying works

Related grades

Where T1010 is used: designations and materials